Double Metal Chromium Carbide Overlay Wear Pipes
Abrasion resistant chromium carbide overlay pipes are designed for use in applications where severe abrasion in combination with moderate impact and heat occurs in the inner diameter of pipes or elbows. made utilizing an overlay process that involves open arc deposition of chromium carbide in a manganese and steel matrix. One pass on the inner pipe surface yields 60HRC while two passes yield a surface hardness of 63HRC. The overlay is rated to be stable at 900°F and a special high temperature version, ,It is available for applications up to 1200°F or 1800°F with stainless steel backing pipe. Available down to a 2 inch diameter and is applied spirally to avoid seams that are parallel to the direction of the material flow.
- hard-plate
- China
- depend on quantity
- 6000 Tons
Details
Chromium Carbide Overlay Wear Pipe
Overview:
Wear pipes are composed of the wear base material and the wear layer, the wear layer is generally accounts for 1/3or 2/3 of total thickness;
The wear layer and the base material is combined through metallurgy, so that the wear layer can’t fall off, and can bear stronger impact.
The wear pipes are processed and molded by two methods, one is that chromium carbide overlay wear plate is rolled by roller press. the other is that we firsthand weld in the seamless steel pipe.
The performance of wear layer in the pipes is the exactly same with chromium carbide overlay wear plate.
The wear pipes’ connection methods are flange connection and welding ;
The wear pipes can be processed into elbow、tee branch、Square to round Transitions、frustum、Square tube， etc.
Wear Resistant Pipe ( CCO Pipe ) Specification:
| Wear Resistant Pipe Material | High-quality wear pipe/ fitting /Elbow with a Chromium Carbide Overlay Welding layer |
| Wear Pipe and Fitting Minimum Inner Diameter | 80mm |
| Thickness | 3+3mm, 4+4mm, 5+5mm,6+6mm....20+20mm, 40+30mm /Customizied |
| Hardness | HRC 58-63 |
| Length | Customizable as per requirements |
| Pipe and Fitting Diameter Options | 1" to 6" |
| Wear Elbow Angle Options | 45°, 90°, 180° |
| Wear Elbow Radius | Customizable as per requirements |
Surface Finish:
Applications:
| Brand | Hardplate |
| Base Plate | Q235/2345 |
| Hardfacing Layer | High chromium high carbide overlay |
| Chemical Composition | C(%):3-5 Cr(%):20-26 |
| Hardness | HRC58-63 |
| Surface Treatment | Hardfacing, clading,coated |
| Minimum Inner Diameter | 80mm |
| Wear Resistance | High wear resistance |
| Thickness | 4+4,5+5,6+5,8+5,8+8,10+8,10+10...etc |
| Place of Origin | China |
| Application | Mining, Steel,Cement,Power,Port,Glass,Steel and Iron,Engineering Machinery,etc. |
Fabrication:
R & D ABILITY
♦Liaoning high-tech enterprise,wear-resistant overlay welding demostration center of MIIT
♦More than 50 national patents including invention patents
♦Well-equipped laboratory with high-end metallographic analysis equipment, spark- optical emission spectrometer.Carbon sulfur analyzer,spectro-photometer,grain-abrasion testing machine,rockwel hardness apparatus,impacttesting machine
♦Participate in setting wear-resistant pipe standard for DL/T power industry
♦Member of China Welding Association
♦Industry-university-research cooperation enterprise of Liaoning petrochemical University
FAQ
Q1: Why are there so many cracks?
A1. Due to the cooling rates of dissimilar metals. Our hard facing plate for coal chute liner is manufactured by welding which results in high temperatures. During the cooling, the plate goes through a stress relieving which is a natural process and does not effect the performance of the plate. The stress relief cracks should be between 3/4" - 2" apart. The cracks can be touched up by our chrome carbide welding rod.
Q2: What is the best method of attachment?
A2. hard facing plate for coal chute liner is usually attached by countersunk bolts, welding studs, perimeter welding, or plug welding. Some methods are better suited than others depending on the specific application. For more detail on each method see the installation section.
Q3: Can hard facing plate for coal chute liner be drilled or machined?
A3. hard facing plate for coal chute liner cannot be machined or drilled. It can however be ground. Mild steel inserts are used to create countersunk or counter bored holes. hard facing plate for coal chute liner can be cut using plasma, Grinding wheel saw, or air-arc gouging.
Q4:MOQ?
A4.Our product has no limit to quantity, it can be ordered according to customer requirement.
Product Tag
Get the latest price? We'll respond as soon as possible(within 12 hours)